Set Home   Add to Favorites  
Home About us Product Feedback Contact us
Fruit Juice Extractor >>
 
  
NO.:
Name:
50Hz 550W Stainless Steel Commercial Juice Extractor For Drink Shops
Format:
Remark:
Category:
Fruit Juice Extractor
 
   Product description

Specification:

 

Juicer extractor KX-A1000

 

Voltage: 220V

Frequency: 50Hz

Power: 180W

Rotate Speed :4300r/min

G.W: 7.5kg

N.W.: 7kg

Extracting Quantity:50 -65kg/hr

Fuselage Size 358×220× 300mm

Package 420×290× 350mm

 

1.Operation Procedure:


A. Power supply of 110v-240v The power supply must have the safety system to connect with the ground.

 

Please don’t replace the machine’s cable by yourself.


B. Check the lid whether lock closely with the bower centering (You can pull the spigot of juice for cask that

 

made of stainless steel if it not move, it’s correct .If it is lax you can readjust the lock pin


C.Connect to the power supply and turn on the machine, examine the machine with your eyes and ears to

 

make sure the function normal before normal work.

 


2. The process of operation.


Please clean the fruit or vegetable you want to squeeze before squeeze and peel off the husk.(For example :

 

orange, watermelon).Some fruit like peach and apricot they have the firm pip you must take out them or it

 

will shatter machine .Cutting the pulp into piece or block smaller than the size of the ostium for putting the

 

pulp. Then put them into clean container. When turn on the machine you can put the pulp into ostium

 

continuously or use the fruit pusher, then the fresh juice will pour from the ostium If you want to change

 

fruit or vegetable the machine worked in normally, infusing clean water into ostium it will be cleaned and

 

the peculiar smell will be resisted.

 

3.After Operation:


If you want to clean or change the blade and centrifugation basket after you use the machine over.You must

 

turn off the power then you can open the lid and screw the nut, take out the blade, centrifugation basket to

 

clean completely (Don’t move the other parts lest should effect the quality for boot-strap). Finally install the

 

parts with reversed sequence. Putting on the lid then the machine can work normally again.

Entry time:2013/4/3 【Print this page】 【Close

Home | About us | Product | Feedback | Contact us
   Made-In-China      Tradekey      EC21      EC plaza      Alibaba      Jiangsu Konmax     
China Kingmax Industrial co., Ltd. Copyright © 2006-2013 All rights reserved.